EBI Auto A/C Expansion Valve

What is expansion valve?

The expansion valve represents the point of separation between the high pressure and low pressure sections in the refrigerant circuit.In order to achieve optimum cooling capacity in the evaporator, it is installed in upstream of the evaporator, and the refrigerant flow is controlled by it as temperature changing.

EBI Part accept customized expansion valves as your requirement.

How do they work ?

The liquid refrigerant arriving through the receiver drier from the condenser, and injected into the evaporator. The evaporating refrigerant releases evaporation cold and make temperature dropping. In order to optimum cooling capacity in the evaporator, the refrigerant flow is controlled by the expansion valve depending on the temperature.

If the refrigerant temperature increases at the end of the evaporator, it expands in the expansion valve. So that an increase of the refrigerant flow (injection quantity) to the evaporator.

If the refrigerant temperature lowers at the end of the evaporator, the volume decreases, and it reduces the refrigerant flow to the evaporator.

See more at www.ebi-part.com or contact us online.

Aluminum Is Part Of Sustainable Future

Aluminum builds a better vehicle. Aluminum’s use in autos and commercial vehicles is accelerating because it offers the fastest, safest, most environmentally friendly and cost-effective way to increase performance, boost fuel economy and reduce emissions while maintaining or improving safety and durability. Aluminum is increasingly the “material of choice” for automakers thanks to its strength and environmental advantages.

Performance benefits

Because aluminum is lighter, it allows automakers to increase dent resistance—they can make body panels thicker while still lowering weight.  And a lower weight vehicle has better acceleration, better braking and better handling.  In addition, lighter vehicles can haul and tow more because the engine isn’t carrying unneeded weight.

Weight, strength and safety benefits

When applied to an optimized automotive body structure, aluminum can provide a weight savings of up to 50 percent compared with the traditional mild steel structure.  Primary-structure weight savings also allow other vehicle systems to be downsized (including the engine, transmission, suspension and wheels). Across the board, in weight, strength and safety, aluminum’s advantages are clear.

Environmental benefits

Nearly 90 percent of automotive aluminum scrap—more than a half-million tons a year—is recovered and recycled. To place this in perspective: Recycling 1 ton of aluminum saves the energy equivalent of 21 barrels of oil. The environmental wins continue: A peer-reviewed study by the Department of Energy’s Oak Ridge National Laboratory found that an aluminum-intensive vehicle can achieve up to a 20 percent reduction in total life cycle energy consumption and up to a 17 percent reduction in CO2 emissions.

EBI Part accept customized automotive parts. See more at http://www.ebi-part.com/contact/

Aluminum Receiver Drier

Aluminum receiver drier and accumulator play an important role in A/C operation.

• These components manage the flow of liquid and vapor refrigerant through the system, assuring maximum output and smooth, surge-free operation.
• Auto receiver drier also contain customized desiccant packages to isolate harmful moisture from the system, protecting the internal components from corrosion, which can wear systems prematurely from the inside out and create costly leaks.
• Auto receiver drier are manufactured to the most stringent factory standards to provide new-car performance and efficiency.
• Receiver drier features a lightweight aluminum or high strength steel assembly and provides an exact fit, just as an OE-quality part should.
  

Accepting customized product if you could offer us drawings or OE Number, welcome to email at info@ebi-part.com.

See more at http://www.ebi-part.com.

Receive Drier of MB(A Class W169 2004)

Spcification:

1. IN: PAD fitting2. OUT: PAD fitting3. DIA: 45mm4. L: 361±2 mm

5. In hole diameter=11mm

6. Out hole diameter=13.6mm  

Suits:MERCEDES BENZ (A CLASS W 169 2004)

Welcome to inquiry!

Contact Info: 

Wendy Wu​

Email: wendy.ebi01@hotmail.com

Web: www.ebi-part.com

Tel. ​ 0086 791 86372550​​​