EBI Electric Radiator Cooling Fan

Cooling fans are used in automotive applications to provide airflow to the vehicle heat exchanger(s). The most common application is the radiator, but some vehicles may require fans for the oil, transmission, or air-to-air, heat exchangers. 

How does the electric radiator cooling fan work?

Electric radiator cooling fans are wired to the vehicle’s electrical system and produce a steady airflow even when the vehicle is stationary. This means they provide the best airflow when your engine needs it most. Since they are electrically powered, they do not drain the vehicle’s horsepower or impact its fuel economy.

This type normally attaches directly to the radiator on either the front or the back. Front-mounted models are known as "pusher fans," while rear-mounted units are known as "puller fans." A pusher fan pushes air from the grille area over the radiator to aid in cooling, and a puller fan pulls air from the grille over the radiator from inside the engine compartment. These electric fans work off of the 12 volt system used by the automobile itself. Many of these fans are thermostatically controlled, meaning that they turn on and off at certain, preset temperatures.

Motor Quality is the Best Factor For Electric Fan

                  

The best factor for determining the longevity and performance of the fan is the motor that drives it. When air is hot or heavy with humidity, cheaper motors won’t be able to drive the airflow needed to keep the engine cool. Worse yet, they may even burn up and fail. High performing fans will use high quality motors that can move the air in a variety of environments without fail. Look for fans that have been tested and used in real word and high performance applications, such as racing. These are the fans with a quality motor that will last. The highest quality motors will be sealed to prevent debris and water from entering the motors.

Wants to know more about the electric cooling fan, pls contact us at info@ebi-part.com or leave message here. 

EBI Auto A/C Expansion Valve

What is expansion valve?

The expansion valve represents the point of separation between the high pressure and low pressure sections in the refrigerant circuit.In order to achieve optimum cooling capacity in the evaporator, it is installed in upstream of the evaporator, and the refrigerant flow is controlled by it as temperature changing.

EBI Part accept customized expansion valves as your requirement.

How do they work ?

The liquid refrigerant arriving through the receiver drier from the condenser, and injected into the evaporator. The evaporating refrigerant releases evaporation cold and make temperature dropping. In order to optimum cooling capacity in the evaporator, the refrigerant flow is controlled by the expansion valve depending on the temperature.

If the refrigerant temperature increases at the end of the evaporator, it expands in the expansion valve. So that an increase of the refrigerant flow (injection quantity) to the evaporator.

If the refrigerant temperature lowers at the end of the evaporator, the volume decreases, and it reduces the refrigerant flow to the evaporator.

See more at www.ebi-part.com or contact us online.

What We EBI Part Could Do For You?

Who is EBI Part?

Nanchang Ever Bright Industrial Trade Co., Ltd (EBI Part) is a professional manufacturer and trader in automotive AC parts, such as muffler, receiver drier, condenser.,etc with more than 15 years history.

EBI Part proudly manufactures our products in ISO/TS 16949:2009 certified factories. 100% products were exported to all over the world and got good feedback from the customers. Keep cooperation with world famous brands for stable quality and competitive price.

What products do we offer?

The component parts of assemblies of automotive air conditioning system, whichever the case, offer a wide variety of options for our current customers. With the ability to custom design parts for special needs, EBI Part Can meet many automotive needs. Among the most regularly supplied parts are:

> A/C Hose &Muffler

> A/C Thermostatic Expansion Valve

> A/C Receiver Drier

> A/C In-Line Fittings &Kits

> A/C Condenser

> Electric Cooling Fans

> Other Custom Aluminum Parts

What advantages do we have?

> OE Quality With Factory Price

> ISO/TS 16949:2009 certified

> More Than 15 Years Business &Exporting Experience

> Professional Team

 We would like to hear from you, if you have any inquires to our products, please feel free to contact us at info@ebi-part.com or Contact us right now.

The Internet of Things (IoT) In China’s Automotive Industry

With the vigorous encouragement of new energy automotive by China government. It’s normal that new companies are developing the smart car(mainly developing the electric car) in a highly growth, including Smart Car&Better Driving, Alibaba and SAIC Motor (one of China’s biggest car makers) ,LeTV Le Supercar, Baidu Car etc. These companies with Internet of Things(IoT) chose the best time to enter into the internet automotive industry.

Most automotive maker in China have a great inventory since the project of “shi er wu”. It’s said that the output of China’s top ten auto groups in the end of 2015 has arrived around 32.5 million cars in total (SAIC, FAW, Dongfeng, Chang’an, Beijing Auto, Guangzhou Auto, Chery, BYD, Brilliance, Geely, and JAC and Great Wall Moto). So getting rid of inventory is the key for auto manufacturer in china, but this is also the good opportunities for other enterprises.

Selling a smart car with IoT could be like selling software, we can make more profits rely on after service. There are a group data made by foreign media, auto manufacturer only get 20% profit in the full time of one car, and the rest profit is taken by insurance company, gas station and other aftermarket. In the other word, there is only a little profit during selling parts.

For the smart car, the internet of things(IoT) could make a connected car. And updating constantly, getting though people’s daily life, such as eating, living, working and smart family, smart wearing. In the future, smart car could make personal driving setting into cloud, then you could share your own driving habits to another new car as same as computer. For the selling part, after service is more important than car itself.

In general, smart car with new thinking is the result of operational innovation, and the Internet is a user-centric car in the final analysis, resources and gradually formed reorganization. We’d glad to see the very special style from internet car industry.

Aluminum Is Part Of Sustainable Future

Aluminum builds a better vehicle. Aluminum’s use in autos and commercial vehicles is accelerating because it offers the fastest, safest, most environmentally friendly and cost-effective way to increase performance, boost fuel economy and reduce emissions while maintaining or improving safety and durability. Aluminum is increasingly the “material of choice” for automakers thanks to its strength and environmental advantages.

Performance benefits

Because aluminum is lighter, it allows automakers to increase dent resistance—they can make body panels thicker while still lowering weight.  And a lower weight vehicle has better acceleration, better braking and better handling.  In addition, lighter vehicles can haul and tow more because the engine isn’t carrying unneeded weight.

Weight, strength and safety benefits

When applied to an optimized automotive body structure, aluminum can provide a weight savings of up to 50 percent compared with the traditional mild steel structure.  Primary-structure weight savings also allow other vehicle systems to be downsized (including the engine, transmission, suspension and wheels). Across the board, in weight, strength and safety, aluminum’s advantages are clear.

Environmental benefits

Nearly 90 percent of automotive aluminum scrap—more than a half-million tons a year—is recovered and recycled. To place this in perspective: Recycling 1 ton of aluminum saves the energy equivalent of 21 barrels of oil. The environmental wins continue: A peer-reviewed study by the Department of Energy’s Oak Ridge National Laboratory found that an aluminum-intensive vehicle can achieve up to a 20 percent reduction in total life cycle energy consumption and up to a 17 percent reduction in CO2 emissions.

EBI Part accept customized automotive parts. See more at http://www.ebi-part.com/contact/

Aluminum Receiver Drier

Aluminum receiver drier and accumulator play an important role in A/C operation.

• These components manage the flow of liquid and vapor refrigerant through the system, assuring maximum output and smooth, surge-free operation.
• Auto receiver drier also contain customized desiccant packages to isolate harmful moisture from the system, protecting the internal components from corrosion, which can wear systems prematurely from the inside out and create costly leaks.
• Auto receiver drier are manufactured to the most stringent factory standards to provide new-car performance and efficiency.
• Receiver drier features a lightweight aluminum or high strength steel assembly and provides an exact fit, just as an OE-quality part should.
  

Accepting customized product if you could offer us drawings or OE Number, welcome to email at info@ebi-part.com.

See more at http://www.ebi-part.com.

EBI Customized Compressor Muffler

What is compressor muffler?

Many people think of exhaust muffler that for decreasing the amount of noise emitted by the exhaust of an internal combustion engine.

However, our customized compressor muffler we mentioned here belongs to automotive HVAC system. When A/C line transfer the liquid and gas between each component, and pressure inside changes. Here aluminum muffler as a vacuum pump in the A/C hose assembly that quiet noise of compressor.

Here’s an example of the air conditioning line:

1. Compressor to condenser line without a muffler.
2. Compressor to condenser line with a muffler.

Aluminum compressor muffler is small and easily to be ignore, but it did have great function to auto air conditioning system.

The muffler is produced by Cold Extrusion which is one kind of EBI’s flagship products

The advantages EBI have are as below:

1. More than 15 yearsbusiness and exporting experience.
2. Factory is ISO/TS 16949:2009 certified and has advanced machine.
3. Professional team who can offer your best solution.
4. OE quality with factory price.

High quality product and service have earned Nanchang Ever Bright Industrial Trade Company many well-known clients, such as Arnott, Visteon, HVCC, Contitech, Maflow and so on.

See more at: http://www.ebi-part.com or email at info@ebi-part.com.