EBI Electric Radiator Cooling Fan

Cooling fans are used in automotive applications to provide airflow to the vehicle heat exchanger(s). The most common application is the radiator, but some vehicles may require fans for the oil, transmission, or air-to-air, heat exchangers. 

How does the electric radiator cooling fan work?

Electric radiator cooling fans are wired to the vehicle’s electrical system and produce a steady airflow even when the vehicle is stationary. This means they provide the best airflow when your engine needs it most. Since they are electrically powered, they do not drain the vehicle’s horsepower or impact its fuel economy.

This type normally attaches directly to the radiator on either the front or the back. Front-mounted models are known as "pusher fans," while rear-mounted units are known as "puller fans." A pusher fan pushes air from the grille area over the radiator to aid in cooling, and a puller fan pulls air from the grille over the radiator from inside the engine compartment. These electric fans work off of the 12 volt system used by the automobile itself. Many of these fans are thermostatically controlled, meaning that they turn on and off at certain, preset temperatures.

Motor Quality is the Best Factor For Electric Fan

                  

The best factor for determining the longevity and performance of the fan is the motor that drives it. When air is hot or heavy with humidity, cheaper motors won’t be able to drive the airflow needed to keep the engine cool. Worse yet, they may even burn up and fail. High performing fans will use high quality motors that can move the air in a variety of environments without fail. Look for fans that have been tested and used in real word and high performance applications, such as racing. These are the fans with a quality motor that will last. The highest quality motors will be sealed to prevent debris and water from entering the motors.

Wants to know more about the electric cooling fan, pls contact us at info@ebi-part.com or leave message here. 

EBI Auto A/C Expansion Valve

What is expansion valve?

The expansion valve represents the point of separation between the high pressure and low pressure sections in the refrigerant circuit.In order to achieve optimum cooling capacity in the evaporator, it is installed in upstream of the evaporator, and the refrigerant flow is controlled by it as temperature changing.

EBI Part accept customized expansion valves as your requirement.

How do they work ?

The liquid refrigerant arriving through the receiver drier from the condenser, and injected into the evaporator. The evaporating refrigerant releases evaporation cold and make temperature dropping. In order to optimum cooling capacity in the evaporator, the refrigerant flow is controlled by the expansion valve depending on the temperature.

If the refrigerant temperature increases at the end of the evaporator, it expands in the expansion valve. So that an increase of the refrigerant flow (injection quantity) to the evaporator.

If the refrigerant temperature lowers at the end of the evaporator, the volume decreases, and it reduces the refrigerant flow to the evaporator.

See more at www.ebi-part.com or contact us online.

What We EBI Part Could Do For You?

Who is EBI Part?

Nanchang Ever Bright Industrial Trade Co., Ltd (EBI Part) is a professional manufacturer and trader in automotive AC parts, such as muffler, receiver drier, condenser.,etc with more than 15 years history.

EBI Part proudly manufactures our products in ISO/TS 16949:2009 certified factories. 100% products were exported to all over the world and got good feedback from the customers. Keep cooperation with world famous brands for stable quality and competitive price.

What products do we offer?

The component parts of assemblies of automotive air conditioning system, whichever the case, offer a wide variety of options for our current customers. With the ability to custom design parts for special needs, EBI Part Can meet many automotive needs. Among the most regularly supplied parts are:

> A/C Hose &Muffler

> A/C Thermostatic Expansion Valve

> A/C Receiver Drier

> A/C In-Line Fittings &Kits

> A/C Condenser

> Electric Cooling Fans

> Other Custom Aluminum Parts

What advantages do we have?

> OE Quality With Factory Price

> ISO/TS 16949:2009 certified

> More Than 15 Years Business &Exporting Experience

> Professional Team

 We would like to hear from you, if you have any inquires to our products, please feel free to contact us at info@ebi-part.com or Contact us right now.